The YF-CNC-5-80 provides greater forming flexibility than a basic four-axis planar wire bender while retaining a more
economical configuration than a full seven-axis 3D machine.
It is designed for components containing several controlled bend angles and limited out-of-plane features. Typical
products include automotive seat wires, pipe and hose clamps, furniture mechanism rods, mounting brackets and
industrial hanging components.
The maximum applicable diameter depends on the wire material. Hard materials and high-tensile wire may require a
reduced processing range compared with softer materials.
| Model No. | CNC-5-80 |
| No. of Axis | 5 |
| input OD of Wire | hard material:Φ3.0 ~φ 6.0mm |
| soft material:Φ3.0 ~ φ8.0 mm | |
| No. of Feeding Round | 3 suits |
| Power of Wire Feeding Motor | 3.5KW |
| Power of Turning Motor | 2.7KW |
| Power of Wire Cuter Motor | 1.0KW |
| Power of Moving Motor | 1.0KW |
| Power of Angle Control Motor | 2.0KW |
| Weight of Machine | 2200KG |
| Input Power | 380V/50HZ/3PH |
| Size of Machine | 2510mm X 1400mm X 1600mm |
The YF-CNC-5-80 is designed for Ø3.0–8.0 mm wire and provides more forming flexibility than a basic four-axis planar machine.
It is suitable for products requiring multiple bending angles, controlled orientation and limited out-of-plane features without the full complexity of a seven-axis 3D forming process.
Automotive seat support wires
Multi-angle mounting brackets
Pipe and hose retaining clamps
Industrial hanging hooks
Furniture mechanism rods
Equipment handles
Locking and positioning rods
Guard support wires
Tool rack components
Agricultural control rods
Custom bent wire hardware
Semi-3D wire components
Automotive components
Furniture mechanisms
Industrial equipment
Pipe and hose systems
Tool storage
General hardware
Choose the YF-CNC-5-80 when a 4-axis machine is not flexible enough, but the product does not require the repeated spatial rotations and complex multi-plane forming associated with the 7-axis series.
