The YF-CNC-1280 is designed for manufacturers producing complex medium-to-heavy wire components from Ø3.0–8.0 mm wire. The following specifications summarize the main information required for machine selection.
| Selection Item | Specification |
|---|---|
| Machine Model | YF-CNC-1280 |
| Machine Category | Heavy-Duty 3D CNC Wire Forming Machine |
| Applicable Wire Diameter | Ø3.0–8.0 mm |
| Control Configuration | 12-axis CNC servo control system |
| Maximum Wire Feed Speed | Up to 100 m/min |
| Wire Feeding System | Four pairs of wire feeding rollers |
| Program Storage | More than 2,000 production programs |
| Forming Capability | Complex 2D and 3D medium-to-heavy wire components |
| Main Forming Functions | Wire feeding, wire rotation, cutting, multi-directional bending and coordinated forming |
| Typical Products | Hooks, brackets, frames, handles, guards, retainers and custom wire components |
| Typical Industries | Automotive, furniture, industrial equipment, retail fixtures and heavy-duty hardware |
| Suitable Production Types | Custom production, high-mix manufacturing, small-to-medium batches and repeat production |
| Tooling Support | Customized tooling according to drawings, samples and forming requirements |
Machine selection should not be based on wire diameter alone. The final machine and tooling configuration must also consider wire material, tensile strength, hardness, product dimensions, bending radius, forming geometry, dimensional tolerances and required production output.
For accurate evaluation, customers should provide a product drawing or physical sample together with the wire diameter, material grade, tensile strength, dimensions, bending geometry, tolerances and expected production quantity.
The YF-CNC-1280 Heavy-Duty 3D CNC Wire Forming Machine is developed for manufacturers producing complex industrial components from Ø3.0–8.0 mm wire.
This page focuses specifically on non-spring wire forming applications. Typical products include heavy-duty hooks, structural brackets, automotive seat frame components, industrial handles, protective guards, support frames, retaining parts and customized 2D or 3D wire forms.
Its coordinated 12-axis CNC servo control system supports wire feeding, wire rotation, cutting and multi-directional forming. This enables the machine to manufacture products with long straight sections, multiple bending directions and bends positioned on different spatial planes.
The 12-axis CNC system allows individual forming movements to operate independently or work together according to the programmed production sequence.
For flat 2D products, the machine can complete accurate feeding, cutting and multiple bending movements on one primary plane. Typical products include flat brackets, retaining parts, industrial hooks and reinforcement wires.
For complex 3D products, programmed wire rotation changes the orientation of the wire between forming steps. This supports seat frame components, headrest wires, industrial handles, protective guards, spatial brackets and customized three-dimensional wire parts.
The YF-CNC-1280 uses four pairs of wire feeding rollers to provide stable wire delivery and reliable gripping force during medium-to-heavy wire forming.
The feeding system supports long straight sections, stable feeding under forming resistance, reduced wire slippage and repeatable feed lengths.
The maximum wire feed speed is up to 100 m/min. Actual production speed depends on product length, wire material, number of bends, forming sequence, tooling configuration and tolerance requirements.
Operators can program wire feeding length, feeding speed, wire rotation, bending angle, forming position, cutting position and movement sequence through the CNC control interface.
More than 2,000 production programs can be stored and recalled. This helps reduce setup time for repeat orders and manufacturers producing multiple customized wire products.
Chinese and English interfaces are available as standard. Additional control-system languages can be customized according to customer requirements.
The YF-CNC-1280 can be evaluated for processing low-carbon steel wire, medium-carbon steel wire, high-carbon steel wire, stainless steel wire, galvanized steel wire, alloy steel wire and other formable metal wire materials.
Actual processing capability depends on material grade, tensile strength, hardness, surface condition, bending radius and product geometry. Wires with the same diameter may require different forming forces when their material properties are different.
Yinfeng can develop customized tooling and forming solutions according to customer drawings, physical samples, wire materials and production requirements.
The evaluation process may include product geometry analysis, forming sequence planning, bending radius analysis, wire rotation planning, cutting-position evaluation, tooling design, trial forming and CNC program optimization.
Customers are advised to provide the product drawing or sample, wire diameter, material grade, tensile strength, overall dimensions, bending geometry, dimensional tolerances and expected production output.
Ø3.0–8.0 mm medium-to-heavy wire processing range
12-axis coordinated CNC servo control
Complex 2D and 3D wire forming capability
Four-pair stable wire feeding system
More than 2,000 stored production programs
Customized tooling according to customer products
Multilingual CNC interface customization
Suitable for custom, high-mix and repeat production
Yinfeng provides installation guidance, commissioning support, operator training, CNC programming assistance, tooling adjustment and production troubleshooting.
Remote technical support is available through email, telephone, WhatsApp and video communication. On-site installation, commissioning and training services can also be arranged according to the customer’s location and confirmed project requirements.
Yinfeng also provides spare-parts supply, maintenance guidance and long-term technical assistance. Warranty terms and service scope are provided according to the confirmed machine configuration and sales contract.
The machine is designed for wire diameters from Ø3.0 mm to Ø8.0 mm. Final suitability also depends on material strength, hardness, bending radius and product geometry.
Yes. Coordinated wire feeding, wire rotation, cutting and forming movements allow the machine to manufacture flat 2D parts and complex three-dimensional wire components.
Typical products include hooks, brackets, handles, guards, support frames, retaining parts, automotive seat frame components, furniture hardware, retail fixture parts and custom 2D or 3D wire forms.
Yes. Tooling and forming programs can be developed according to product drawings, physical samples, wire materials, dimensions and tolerance requirements.
Yes. Chinese and English are available as standard, and additional interface languages can be customized according to customer requirements.
This page focuses on non-spring 2D and 3D wire components such as hooks, brackets, handles, frames, guards and retaining parts. Customers producing heavy torsion springs, double torsion springs, extension springs or other large spring products should refer to the dedicated YF-CNC-1280 Camless Spring Forming Machine page.
The YF-CNC-1280 is a heavy-duty 3D CNC wire forming machine for manufacturers producing complex industrial components from Ø3.0–8.0 mm wire.
Its 12-axis CNC control, wire rotation capability, four-pair feeding system and programmable forming movements make it suitable for automotive components, furniture hardware, retail fixtures, industrial equipment and customized heavy-wire products.
The YF-CNC-1280 can be configured to manufacture a wide range of medium-to-heavy non-spring wire components from Ø3.0–8.0 mm wire.
Seat frame wire components
Headrest frame wires
Seat support rods
Locking rods
Retaining components
Structural wire brackets
Chair support wires
Sofa frame components
Bed frame wire parts
Furniture connecting rods
Backrest support wires
Furniture brackets
Shopping cart components
Wire basket parts
Display rack frames
Product holders
Shelf support wires
Retail fixture components
Heavy-duty wire hooks
Structural brackets
Industrial handles
Protective wire guards
Equipment support frames
Retaining and locking parts
Heavy wire rings
Custom 2D wire forms
Complex 3D wire components
Actual manufacturability depends on wire material, tensile strength, hardness, bending radius, overall dimensions, tooling arrangement, dimensional tolerances and required production speed.
